7-4 Preventive Maintenance
D-H001.0609EN
7.3 Clean the Outside of the Teat Cups
CAUTION
Do not use a high pressure cleaner to clean the teat cups. Damage to the teat cups
may occur.
1. Take the milking robot out of operation with the X-link (page 6-5)
2. Move the Robot Arm to the Service Position.
3. Use a bucket of water and a brush, or a soft spray hose to clean the outside of the teat cups.
4. Put the milking robot in operation with the X-link (page 6-3).
5. Start a Short Rinse (X-link) (page 6-15).
To Next Page
Loading...
Need help?
General
