Preventive Maintenance 7-19
D-H001.0609EN
7.14 Examine the Quantity of Astri®-CID
Note:
The red hose goes to the Astri®-CID container.
1. Open the doors of the machine room.
2. Make sure there is sufficient Astri®-CID in the container and the hose is sufficiently into the liquid to suck
correctly.
3. If necessary, replace the container with a full one when the level is too low.
4. Close the doors of the machine room.
7.15 Examine the Quantity of Astri®-LIN
Note:
The blue hose goes to the Astri®-LIN container.
1. Open the doors of the machine room.
2. Make sure there is sufficient Astri®-LIN in the container and the hose is sufficiently into the liquid to suck
correctly.
3. If necessary, replace the container with a full one when the level is too low.
4. Close the doors of the machine room.
7.16 Examine the Quantity of Astri®-L
Note:
The green hose goes to the Astri®-UC container.
1. Open the doors of the machine room.
2. Make sure there is sufficient Astri®-L in the container and the hose is sufficiently into the liquid to suck
correctly.
3. If necessary, replace the container with a full one when the level is too low.
4. Close the doors of the machine room.
7.17 Examine the Quantity of Astri®-UC
Note:
The transparant hose goes to the Astri®-UC container.
1. Open the doors of the machine room.