Operating Instructions 6-5
D-H001.0609EN
6.5 Take the Milking Robot Out of Operation
It is possible to take the milking robot out of operation with the X-link (page 6-5) or the CRS+ (page 6-5).
6.5.1 Take the Robot Out of Operation (X-link)
When the milking robot is in operation:
1. Select:
- [
^ ]
- [
]
2. Make sure the button changes to [
] and then to [ ], the milking robot is then
out of operation.
When the milking robot is going into operation:
1. Select:
- [
^ ]
-
2. Make sure the button changes to [
], the milking robot is then out of operation.
6.5.2 Take the Robot Out of Operation (CRS+)
1. Press [
ENTER].
2. Select:
Cleaning system > Robots out of operation > Yes.
3. Press [
ENTER].