5.2308.8512.0 B
2-2 SAFETY
YOU are the key to safety. Good safety practices protect you and the
people around you. Make these practices a working part of your safety
program. Make sure EVERYONE who operates, maintains or works near
the concentrate feeder obeys the safety precautions. Do not risk injury or
death by ignoring good safety practices.
• COSMIX P owners must train operators before they operate the
concentrate feeder. This training must be repeated at least annually
• The operator must read, understand and obey all safety and operating
instructions in the manual
• A person who has not read and understood all safety and operating
instructions is not permitted to operate the concentrate feeder
• Do not modify the equipment in any way. Unauthorized modification
may impair the function and/or safety and could affect the life of the
equipment, and persons
• Only use approved spare parts, and make sure they are only installed
by authorized technicians.
2.3.1 General Safety
• Read and understand the manual and all safety signs before you
connect power supplies to operate, maintain or adjust the concentrate
feeder.
• Only trained persons are permitted to operate the concentrate feeder.
• A first-aid kit must be available near the concentrate feeder. Store in a
highly visible place.
• A carbon dioxide or foam fire extinguisher must be available near the
concentrate feeder. Store the fire extinguisher in a highly visible place
• Install all protective covers and guards before you operate the
concentrate feeder.
• Wear the correct protective clothing and equipment.
• Disconnect and isolate the electrical power supply, release pneumatic
pressure and wait for all moving parts to stop before you clean or do
maintenance on the concentrate feeder.
• Know the emergency medical center number for your area.
• Contact your nearest Lely service provider if you have any questions.
• Review safety related items with all operators frequently (annually).
2.3.2 Electrical Safety
• Only an authorized electrician must install the electrical power supply
for the concentrate feeder.
• Make sure the electrical grounding of the electrical system and all
parts of the concentrate feeder meet the local rules and regulations
• Replace any damaged electrical lines, conduits, switches and
components immediately.
• Isolate the electrical power supply before you open the PCB box to
work on the electrical system.
innovators in agriculture
To Next Page
Loading...
