LELY COSMIX P - 5.4 Connect the Cosmix P

5.2308.8512.0 B
5-30 INSTALLATION
Figure 39. Install the EWA transformer
KEY:
1. EWA transformer box - 2. Cable shoe - 3. Upper cover EWA transformer housing - 4.
Lower cover EWA transformer housing - 5. Cable shoe
5.4 Connect the Cosmix P
Use a cable channel to protect the cables and tubes against external
mechanical effects. Use a separate cable channel for the network cable
to protect it from electromagnetic interference (EMI).
5.4.1 Connect the Air Tubes
1. Find the air tubes that are connected to the dosing unit.
Each feed dosing unit has a black and a blue air tube.
2. Feed the air tubes into the control box.
3. Connect the black air tube to the tube connector (14) (see figure 40 on
page 5-32) on the valve unit.
4. Connect the blue air tube to the tube connector (13) on the valve unit.
5. Connect the blue air tube that leads to the pneumatic cylinder to the
tube connector (10).
innovators in agriculture