5.2308.8512.0 B
DESCRIPTION AND OPERATION 4-15
The LCD display also shows reports and alarms.
The connector of the E-Link Manual Controller is on the front side of the
control box (2) (see figure 9 on page 4-9).
The E-Link has the following buttons:
• Soft buttons (1): confirm the action on the LCD display above the
applicable button.
• Start/Stop button (2): starts or stops an action.
• Enter button (4): open the selected function or the next menu screen.
• Menu button (5).
• Arrow buttons (3 and 7): move the selector up/down, increase/
decrease a value by one.
• Escape button (6): return to the previous screen.
Figure 14. The E-Link manual controller
KEY:
1. Soft buttons - 2. Start or stop button - 3. Arrow down button - 4. Enter button - 5.
Menu button - 6. Escape button - 7. Arrow up button - 8. LCD display
4.5.2 Menu Structure E-Link
The main menu on the E-Link has the following items:
• Version info.
• Settings.
• Network Settings.
• Testing.
• Setup.
An input selection on the E-Link is shown as a grey cross-hatched block.
innovators in agriculture
To Next Page
Loading...
