5.2308.8512.0 B
OPERATING INSTRUCTIONS 6-1
6 OPERATING INSTRUCTIONS
6.1 List Details about the Rest Feed
Make sure the connection with T4C is still working properly if:
• Two or more Cosmix machines are installed and
• The amount of rest feed in T4C raises quickly.
To make sure that cows can not eat too much concentrate 2 or more
concentrate feeders must always be synchronized via T4C.
Operation must be done with T4C .
The report ‘Feeding - Rest Feed’ displays only information about cows
that have rest feed.
1. Go to the page ‘Analysis/Reports’ > ‘Reports’.
2. Select the report 'Feeding - Rest Feed'.
Make sure feed types in the concentrate feeder have a unique name.
This makes it possible to report feeding details from the concentrate
feeder apart from the milking robot.
3. Select the feed types to be added to the report.
4. Select button [Open].
6.2 List a Feed Overview
The report ''Feed Overview' displays information about all cows.
1. Go to the page Analysis/Reports > Reports.
2. Select the report 'Feed Overview'.
Make sure feed types in the concentrate feeder have a unique name.
This makes it possible to report feeding details from the concentrate
feeder apart from the milking robot.
3. Select the feed types to be added to the report.
4. Select button [Open].
innovators in agriculture
To Next Page
Loading...
