LELY COSMIX P - 7.5.1 Test the Time Setting; 7.5.2 Display Real Time Information; 7.5.3 Test the Tag-ID; 7.5.4 Test the Dosing Units

5.2308.8512.0 B
7-6 TEST AND ADJUSTMENT
2. Else, set the time (see page 7-3).
7.5.2 Display Real Time Information
Block the cow traffic to the concentrate feeder before you do
this procedure.
Use the E-Link manual controller for this procedure.
1. In the main menu, select 'Testing' and push button [
].
2. Select 'RealTimeInfo' and push button [
].
3.
The display shows:
• the tag ID of the identified cow.
• the content of the feed bin.
• the cows credit.
• the amount of food the cow has already eaten.
7.5.3 Test the Tag-ID
Block the cow traffic to the concentrate feeder before you do
this procedure.
Use the E-Link manual controller for this procedure.
1. In the main menu, select 'Testing' and push button [
].
2. Select 'Tag id' and push button [
]. The display shows:
• the tag ID of the identified cow.
• a value 1 if the cow is detected by the (optional) photocell.
3. Push button [
].
7.5.4 Test the Dosing Units
Block the cow traffic to the concentrate feeder before you do
this procedure.
Use the E-Link manual controller for this procedure.
1. Make sure the feed funnels are not empty.
2. In the main menu, select 'Testing' and push button [
].
3. Select 'Valves/Blocker' and push button [
].
4. Select 'Valve 1' and push button [
].
5. Make sure the dosing unit gives the correct feed type.
innovators in agriculture