5.2308.8512.0 B
5-36 INSTALLATION
16. Repeat the installation procedure for the other side of the network
cable.
Figure 43. Install a type 1 network connector
5.4.6 Install a Type 2 Network Connector
Special tools
• Ethernet crimping tool.
Preparation
1. Make sure the network cable is of type S-FTP 200MHz CAT5e.
2. Cut a piece of network cable to the correct length.
3. Feed the network cable into the control box.
Installation
1. Install the connector cover and the cap on the network cable (1) (see
figure 44 on page 5-38).
innovators in agriculture
To Next Page
Loading...
