5.2308.8512.0 B
INSTALLATION 5-19
17. Remove the dust covers from the tube connectors (6,8) (see figure 33
on page 5-24) on the pneumatic cylinder.
18. Install the pneumatic cylinder between the bracket at the control box
side and the bracket at the M-box side with the bolts (5), washers
(2,4), bushings (3) and nuts (1).
Figure 27. Assemble the M-box
KEY:
1. Bolt - 2. Washer - 3. Cap nut
innovators in agriculture
To Next Page
Loading...
