AC power cords 151
AC power cords
IMPORTANT: The plug and the complete power cable assembly must meet the standards appropriate to the
country, and must have safety approvals acceptable in that country.
Recycling of Waste Electrical and Electronic Equipment (WEEE)
At the end of the product’s life, all scrap/waste electrical and electronic equipment should be recycled in
accordance with national regulations applicable to the handling of hazardous/toxic electrical and electronic waste
materials.
Please contact your supplier/Lenovo for a copy of the Recycling Procedures applicable to your country.
IMPORTANT: Observe all applicable safety precautions detailed in the preceding chapters (weight restrictions,
handling batteries and lasers, etc.) when dismantling and disposing of this equipment.
Radiated emissions limit levels CFR47 Part 15B Class A
EN55022 Class A
CISPR Class A
Harmonics and flicker EN61000-3-2/3
Immunity limit levels EN55024
Table 36 EMC compliance specifications (continued)
Table 37 AC power cord specifications
1 United States of America–Must be NRTL Listed (National Recognized Test Laboratory – e.g., UL):
Chassis form factor 2U12/2U24 5U84
Cord type SV or SVT, 18 AWG minimum, 3
conductor, 2.0M max length
SJT or SVT, 12 AWG minimum, 3
conductor
Plug (AC source) NEMA 5–15P grounding-type
attachment plug rated 120V 10A
IEC 320 C-20, 250V, 20A
or or
IEC 320, C-14, 250V, 10A A suitable plug rated 250V, 20A
Socket IEC 320, C-13, 250V, 10A IEC 320, C-19, 250V, 20A
2 Europe and others–General requirements:
Chassis form factor 2U12/2U24 5U84
Cord type Harmonized, H05-WF-3G1.0 Harmonized, H05-WF-3G2.5
Plug (AC source)
IEC 320 C-20, 250V, 16A
or
A suitable plug rated 250V, 16A
Socket IEC 320, C-13, 250V, 10A IEC 320, C-19, 250V, 16A
To Next Page
Loading...
Need help?
General