After you finish
1. Install a replacement unit. See
“Install a PCIe adapter” on page 109. Otherwise, install a bracket to cover
the vacancy on the chassis, and close the retainer clip.
Figure 89. Installing a PCIe adapter bracket
2. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Install a PCIe adapter
Follow instructions in this section to install a PCIe adapter.
About this task
S002
CAUTION:
The power-control button on the device and the power switch on the power supply do not turn off the
electrical current supplied to the device. The device also might have more than one power cord. To
remove all electrical current from the device, ensure that all power cords are disconnected from the
power source.
Attention:
Chapter 5. Hardware replacement procedures 109
To Next Page
Loading...
