Cable routing for optical disk drive
Follow the instructions in this section to learn how to do cable routing for the optical disk drive (ODD).
For the system-board connector locations, see
“System-board connectors” on page 17.
Figure 124. Cable routing for optical disk drive
Table 10. Cable routing for optical disk drive
From (ODD) To (system board)
Cable
1 Signal connector
1 SATA 2 connector
7pin SATA to 7pin Slim ODD SATA,
520 mm
2 Power connector
2 SATA power 1 connector
4pin power to HDD&Slim ODD, 300
mm/210 mm/120 mm
150 ThinkSystem ST45 V3 User Guide
To Next Page
Loading...
