EasyManua.ls Logo

Lenovo ThinkSystem ST45 V3 - Mechanical Specifications

Lenovo ThinkSystem ST45 V3
204 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
RAID/HBA adapter
The following options are available for this server.
ThinkSystem RAID 5350-8i PCIe 12Gb Adapter (RAID level 0, 1, and 5)
ThinkSystem 4350-8i SAS/SATA 12Gb HBA
For more information about the RAID/HBA adapters, see
Lenovo ThinkSystem RAID Adapter and HBA Reference.
System fan
The server supports up to three fans:
One front fan
One rear fan
One processor heat sink fan
Electrical input
The server supports one of the following non-hot-swap, non-redundant power supplies:
Fixed ATX 300-watt Single-Output Gold
Input power 115 Vac or 230 Vac
Fixed ATX 500-watt Multi-Output Platinum
Input power 115 Vac or 230 Vac
Minimal configuration for debugging
One processor and one processor cooling heat sink
One 16 GB ECC UDIMM in DIMM slot 1
One power supply
One power cord
One 3.5-inch SATA drive in drive bay 0
One system front fan (if debugging is out of chassis)
Operating systems
Supported and certified operating systems:
Microsoft Windows Server
Red Hat Enterprise Linux
SUSE Linux Enterprise Server
Canonical Ubuntu
References:
Complete list of available operating systems:
https://lenovopress.lenovo.com/osig.
OS deployment instructions:
“Deploy the operating system” on page 165.
Mechanical specifications
Summary of the mechanical specifications of server. Depending on the model, some features might not be
available, or some specifications might not apply.
Chapter 1. Introduction 5

Table of Contents

Related product manuals