Lenovo ThinkSystem ST45 V3 - UEFI Upgrade Problem

2. Review the document that came with the RAID adapter to make sure RAID is set properly.
Suspected RAID volume failure
Reboot the system, press F1 to go to Setup Utility, and select Advanced ➙ x350-8i ➙ Array Configuration
➙ Manage Arrays ➙ Array X ➙ List Logical Drives ➙ Logical Drive X (Logical Drive X) ➙ Logical Drive
Details to check failure symptoms.
UEFI upgrade problem
In Linux operating systems, if the message "0x10 Error: Unable to load driver" is displayed during UEFI
upgrade and Secure Boot is enabled, complete the following steps to upgrade UEFI.
1. Go to
https://www.ami.com/bios-uefi-utilities/#aptiov.
2. Download “APTIO V AMI FIRMWARE UPDATE UTILITY” and unzip the file.
3. Refer to “Chapter 6 Signing Driver and Enrolling Public Key to the System” in AMI_Aptio_5.x_AFU_User_
Guide_NDA.pdf for details.
Note: The PDF file is included in “APTIO V AMI FIRMWARE UPDATE UTILITY”.
182
ThinkSystem ST45 V3 User Guide