Lenovo ThinkSystem ST45 V3 - Ethernet Port (10;100;1000 Mbps RJ-45); Leds

Figure 132. System-board LED
Table 19. System-board-LED
LED
Description
1 Drive activity LED (white) This LED indicates the activity of the drives.
• Blinking: The drives are active.
• Off: The drives are not active.
Ethernet port (10/100/1000 Mbps RJ-45) LEDs
This topic provides information on LEDs of Ethernet port (10/100/1000 Mbps RJ-45).
Figure 133. Ethernet port (10/100/1000 Mbps RJ-45) LEDs
LED
Description
1 Link LED
Use this LED to distinguish the network connectivity status:
• Off: The network link is disconnected, or the network link is established at the speed of 10
Mbps.
• Green: The network link is established at the speed of 100 Mbps.
• Orange: The network link is established at the speed of 1000 Mbps.
2 Activity LED
Use this LED to distinguish the network activity status:
• Off: No data is being transmitted.
• Blinking: Data is being transmitted.
168 ThinkSystem ST45 V3 User Guide