Figure 115. Removing the cage bar
After you finish
1. Install a replacement unit. See
“Install the server cover” on page 137.
2. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Install the server cover
Follow instructions in this section to install the server cover.
About this task
S002
CAUTION:
The power-control button on the device and the power switch on the power supply do not turn off the
electrical current supplied to the device. The device also might have more than one power cord. To
remove all electrical current from the device, ensure that all power cords are disconnected from the
power source.
S014
Chapter 5. Hardware replacement procedures 137
To Next Page
Loading...
