Figure 93. Removing the front I/O bracket from the chassis
Step 5. Remove the power button with LED from the front I/O bracket.
a.
Press the release tab on the power button to release it from the front I/O bracket.
b.
Remove the power button from the front I/O bracket.
Figure 94. Removing the power button with LED
After you finish
1. Install a replacement unit. See “Install the power button with LED” on page 114.
2. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Chapter 5. Hardware replacement procedures 113
To Next Page
Loading...
