Figure 54. Removing the optical drive retainer
Step 4. (Optional) Pull the optical drive bezel away to remove it from the optical drive.
Figure 55. Removing the optical drive bezel
After you finish
1. Install a replacement unit. See
“Install an optical drive” on page 75.
2. If no optical drive is to be installed, install the optical drive bay shield back to the front bezel.
a.
Engage the bottom of the shield to the opening on the front bezel.
b.
Pivot the shield towards the front bezel until it snaps into place.
74
ThinkSystem ST45 V3 User Guide
To Next Page
Loading...
