Product description
Concepts for the mains connection
Concepts for the connection of the power bus
3
33
EDS84DPS424 EN 5.0
Standard cable with power distributors and external 24 V buffer voltage
Isolated cable routing for mains voltage and 24 V buffer voltage.
Here, the mains voltage is connected to the controller by means of a standard cable (plug
X10). The external 24 V buffer voltage (self−contained) is connected by means of a standard
cable (plug X11). Depending on the state of the external 24 V supply, it is possible for the
control electronics to remain active even if the mains is switched off.
To Next Page
Loading...
