Lenze i700

Lenze · i700 servo inverter · reference manual · DMS 3.0 EN · 06/2016 · TD06 173
6 Holding brake control
6.6 Settings
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Subindex 11: Holding brake: Override of the holding brake control
Mode for override or forced release/application of the holding brake independent of the operating mode.
• In the event of an error and activated function for forced release, the brake is not applied.
Selection list (Lenze setting printed in bold) Info
0 No override active No override active
1 Release holding brake Open brake
2 Apply holding brake Apply brake
 Write access  CINH  OSC  P  RX  TX UNSIGNED_8