Leuze electronic RSL 430 - Page 56

Mounting
Leuze electronic RSL 430 56
1
2 3
1 Safety sensor
2 Protective field
3 Unmonitored area;
Optimum availability at a distance of 50mm to fixed contours
Fig.7.6: Unmonitored area
Ä Prevent access to an unmonitored area with screens.
Ä Prevent walking behind by countersinking the safety sensor into the machine contour.
3
2
1
1
4 5 4 53
6
1 Countersinking into the machine contour, min. 100mm
2 Minimum distance above the scanner unit, min. 34mm
3 Protective field
4 Safety sensor
5 Machine
6 Angled physical cover
Fig.7.7: Stepping behind protection by countersinking into the machine contour
Ä Use a physical cover set at an angle over the safety sensor if you expect that the safety sensor will be
used as a climbing aid or standing surface.