Lexmark C543dn Service Manual

2-6 Service Manual
5025-2xx, 4xx
Go Back
Previous
Next
Load <source>
<type> <size>
Printer does not detect media meeting the size or type requested in the source
indicated.
• Load the input source with the correct type and size media.
•Press Stop ( ), and then press Select ( ) to cancel printing.
Load single sheet
feeder with
<custom type name>
Printer does not detect media meeting the description <custom type name> in the
single sheet feeder.
The following actions can be taken:
• Load paper, press Select ( ), and the job continues.
•Press Select ( ) to override the source, and an alternate source for media is
selected.
•Press Stop ( ), and then press Select ( ) to cancel printing.
• Define a name for each custom type (Custom 1–6) using the MarkVision™ utility.
When the printer is prompting for one of the custom types, which has been
named, then only the custom name is displayed.
Load single sheet
feeder with
<custom string>
Printer does not detect media meeting the description <custom string> in the single
sheet feeder.
The following actions can be taken:
• Load paper and the job continues.
•Press Select ( ), and choose an alternate source for media.
•Press Stop ( ), and then press Select ( ) to cancel printing.
Load single sheet
feeder with <size>
Printer does not detect media meeting the description <size> in the single sheet
feeder.
The following actions can be taken:
• Load the single sheet feeder with the correct paper type and size.
If no paper is in the feeder, load a sheet of paper, and then press Select ( ) to
clear the message and continue printing.
•Press Select ( ) to clear the message and continue printing.
The printer manually overrides the manual request, and then paper prints from an
automatic source.
•Press Stop ( ), and then press Select ( ) to cancel printing.
Load single sheet
feeder with <type>
<size>
Printer does not detect media meeting the description <type> and <size> in the single
sheet feeder (manual feeder).
The following actions can be taken:
• Load the manual feeder with the correct paper type and size.
If no paper is in the feeder, load a sheet, and then press Select
( ) to clear the
message and continue printing.
•Press Select ( ) to clear the message and continue printing.
The printer manually overrides the manual request, and then paper prints from an
automatic source.
•Press Stop ( ), and then press Select ( ) to cancel printing.
Power Saver The printer is saving power while it waits for the next print job.
• Send a job to print.
•Press Select ( ) to warm the printer to normal operating temperature.
Afterwards, Ready appears.
Programming Code The printer is receiving a file that is a code update. Wait for the message to clear.
Warning—Potential Damage: Do not turn the printer off while this message appears
on the display.
Programming Flash Fonts and macros are being written to flash. Wait for the message to clear.
Ready The printer is ready to print.
Reload printed paged
in Tray <x>
•Press Select ( ) to clear the message and continue processing the second side
of the sheet.
•Press Stop ( ), and then press Select ( ) to cancel printing.
User primary
message
Explanation

Lexmark C543dn Specifications

General

Brand	Lexmark
Model	C543dn
Category	Printer
Language	English