Diagnostic aids 3-17
5056-XXX
Printer Setup
Defaults
The value of this setting determines whether the printer uses the US or Non-US factory default value for the
following printer settings:
Note: Changing this setting's value has the same effect as selecting "Restore Base" or "Restore Network" in the
Factory Default Configuration menu setting.
Light Quantity
•
Cyan
• Magenta
• Yellow
• Black
Range = 0 to 45
Note: The light quantity does not need to be set when replacing a LED printhead.
Page Counts
The values of these settings indicate the total number of mono (including blank) and color pages generated by
the printer. The permanent page count can also be viewed in this sub-menu. After all manufacturing printing
tests have been completed, this value is set to 0.
Note: Unlike in past implementations, the values of these settings cannot be changed by a user or a CE. To
return to the main PRINTER SETUP menu, a user can press Back.
Printer Setting US value Non-US value
Paper Sizes
(Paper feeding sources which do not have hardware
size sensing capability)
Letter A4
Envelope Size
(Envelope feeding sources which do not have
hardware size sensing capability)
10 Envelope DL Envelope
PCL Symbol Set PC-8 PC-850
PPDS Code Page 437 850
Universal Units of Measure Inches Millimeters
To Next Page
Loading...
