3-18 Service Manual
5056-XXX
Serial Number
This printer setting records the printer's serial number that was assigned by manufacturing.
The Serial Number menu item allows you to set the Serial Number for the printer. To set the Serial Number:
1. Select the Serial Number menu item from the Printer Setup menu by pressing the key. This screen will
be displayed:
2. Move the cursor to the desired digit in the Serial Number by pressing the or arrow key.
3. Set the digit to the desired setting by pressing the or arrow key.
When you are finished setting the Serial Number, press the key. This will save the setting.
Note: Do not press the Back key before pressing the key. Doing this will result in the new setting not being
saved.
Model Name
Selecting this menu item displays the printer's model name.
Configuration ID
Use the configuration ID to communicate characteristics of the printer that cannot be determined by the
hardware sensors. The configuration ID is originally set when the printer is manufactured, The C920 uses 2
Configuration IDs, each of which consists of 8 digits. When Configuration ID is selected from the PRINTER
SETUP menu, the current ID is displayed:
The Configuration ID menu item allows you to set both Configuration ID settings for the printer. To set the
configuration ID:
1. Select the Configuration ID menu item from the Printer Setup menu by pressing the key.
2. Move the cursor to the desired digit in the Configuration ID by pressing the or arrow key.
3. Set the digit to the desired setting by pressing the or arrow key.
To Next Page
Loading...
