Preventive maintenance 6-1
5056-XXX
6. Preventive maintenance
Maintenance kit
When nearing the end-of-life of the fuser or transfer belt, the following message appears, indicating that it’s time
to replace the fuser unit and/or transfer belt unit:
80 Belt Life Warning and/or 80 Fuser Life Warning
Routine replacement of these parts ensures peak printer performance and helps prevent print quality problems
and paper feed problems resulting from worn parts. The parts are in the maintenance kits listed.
The status message appears until the appropriate part(s) is replaced.
Paper path maintenance
A paper path maintenance kit can be used when a machine is experiencing misfeeds and jams after 200,000
pages. The order number for this kit is 40X1109. The kit is composed of the following parts:
In addition to the paper path maintenance kit, the relay roller (40X1108) and turn guide rollers (40X1072) can be
ordered.
When replacing the face down exit roller, lubricate the ends of the roller shaft with a small amount of Nyogel 744
(part number 40X0179).
Maintenance kit P/N Unit Printer power supply
40X1251 Transfer Belt 115 V—230 V
56P2650 Fuser 115 V
56P2651 Fuser 230 V
56P9683 Carrying roller
40X1154 Registration frame
40X1077 Pickup roll
40X1078 Paper feed roll
40X1079 Separator roll
40X1064 FD paper exit roller
To Next Page
Loading...
