Lexmark C920 - Power and Electrical Specifications; Power Requirements; Electrical Specifications; Low Voltage Models

General information 1-17
5056-XXX
Power and electrical specifications
The following table specifies the nominal average power requirements for the standard printer configuration (no
options installed). All power levels are shown in watts (W). Maximum current is given in amperes (A).
Power requirements
Average nominal power requirements for the base printer configuration (110 volt). Power levels are shown in
watts.
Electrical specifications
Low voltage models
•
110 to 127 V at 50 to 60 hertz (Hz) nominal
• 99 to 135 V, extreme
High voltage models
•
220 to 240 V at 50 to 60 hertz (Hz) nominal
• 198 to 254 V, extreme
Note: Using a 220 to 110 power converter with the 110 V printer is not recommended.
Printing states Base n dn dtn
Fully
configured
Average power while printing
Continuous mono
Continuous color
400W
290W
400W
290W
410W
300W
410W
300W
410W
300W
Average power while idle
Power Saver on
Power Saver off
13W
125W
14W
125W
15W
125W
15W
125W
15W
125W
Max current while printing
120 V
230 V
11A
6A
11A
6A
11A
6A
11A
6A
11A
6A