Locations 5-19
5056-XXX
High-capacity feeder (HCF)
High-capacity paper feed configuration
Tray
Call Roller
Near End Sensor
Residual Paper Sensor 1
Residual Paper Sensor 2
Residual Paper Sensor 3
Tray Motor
Call Roller
Down Sensor
Tray Driving Belt
Paper Level Sensor
Reverse Roller
Transfer Roller
Paper Feed Sensor
Paper Feed Roller
Pickup Solenoid
Up Sensor
Paper End Sensor
Paper Size Sensor 1,2
Paper Feed Motor
H
C
F
Paper feed and separation
mechanism
Tray up & down mechanism
Size detection mechanism
Residual paper detection
mechanism
Paper end detection
mechanism
Friction roller separation system with a non-contact
magnet type maintenance-free torque limiter.
Tray elevating system consisting of a tray motor and
a timing belt.
Fixed to the side fence, and size is entered from
the printer.
Tray level is detected with the fillers and photo
interrupters (4 pieces).
A reflection type sensor on the upper stay detects
the paper.
To Next Page
Loading...
Need help?
General
