2-42 Service Manual
5056-XXX
Clearing finisher messages
86 Abnormal coating roll The coating roller is damaged, or
performing abnormally.
Replace the coating roll.
88 <color> Toner is low Self explanatory. Replace the specified toner
cartridge.
Select Continue to clear the
message and continue printing.
88 Replace <color> toner Self explanatory. Replace the specified toner
cartridge.
Select Continue to clear the
message and continue printing.
88 OCR exhausted The OCR has reached the end of
life and needs to be replaced.
Replace the oil coating roll.
Select Continue to clear the
message and continue printing.
200.yy Paper jam 1. Clear the paper path.
2. After clearing the paper path,
select Continue to resume
printing.
24x.yy Paper jam 1. Clear the paper path.
2. After clearing the paper path,
select Continue to resume
printing.
250.yy Paper jam 1. Clear the paper path.
2. After clearing the paper path,
select Continue to resume
printing.
249.yy Paper jam 1. Clear the paper path.
2. After clearing the paper path,
select Continue to resume
printing.
Message Solution
Bin <x> Full Remove the stack of paper from the bin to clear the message. If you
assigned the bin a name, the bin name is displayed instead of the bin
number. Press
to clear the message and continue printing.
Check Finisher Installation Make sure the finisher is flush against the printer. If this does not resolve
the problem, go to “Finisher service check” on page 2-77 to check the
finisher set switch.
Close Finisher Top Cover Close the finisher top cover, and align the finisher flush against the
printer to clear the message.
Empty Box Empty the hole punch box to continue printing.
Leave Staple Job in Finisher The printer has detected a paper jam while printing a job that must be
stapled. The message Leave Staple Job in Finisher alternates
with the Paper Jam message. Leave the printed pages on the stacking
tray inside the finisher, and clear the paper jam in the printer. Press
to clear the message and continue printing.
Staples Empty Replace the staple cartridge if you want to continue stapling. You can
press Go to clear the message and continue printing without stapling.
Message Meaning Action
To Next Page
Loading...
