Lexmark C920 - Attendance Messages

2-30 Service Manual
5056-XXX
Attendance messages
Note: For more information on clearing paper jams, refer to “Clearing paper jams” on page 3-34.
Message Meaning Action
Activating Menu Changes The printer is activating changes
made to the printer settings.
Wait for the message to clear.
All Photo Dev Life Warning All photodevelopers are nearing
the end of life and need replacing.
-Select Continue to clear the
message and print without replacing
the photodevelopers.
-Replace all photodevelopers.
<bin name> Full The specified bin is full. Remove the stack of paper from the
specified bin to clear the message.
Black Photo Dev Life Warning The black photodeveloper is
nearing the end of life.
- Select Continue to clear the
message and print without replacing
the black photodeveloper.
- Replace the black photodeveloper.
Busy The printer is busy receiving or
processing print data.
Wait for the message to clear, or
cancel the print job.
Calibrating The printer is calibrating. Wait for the message to clear.
Cancel not available Wait for the message to clear.
Cancelling The printer is processing a
request to cancel a job.
Wait for the message to clear.
Change <src> <Custom Type
Name>
The printer is requesting a
different type or size of paper.
- Select Continue if you have
changed the media.
- Select Use current to print on
media currently in the printer.
- Cancel the current job.
Change <src> <Custom String>
Change <src> <size>
Change <src> <type> <size>
Check tray <x> connection The printer cannot sense the
presence of a tray.
Turn the printer off and back on. If
the error recurs, turn the printer off,
remove the specified tray, then
reattach the tray.
If the error recurs, turn the printer off,
remove the specified device, and call
for service.
Select Continue to clear the
message and print without using the
device.
Clearing job accounting statistics The printer is deleting all job
statistics stored on the hard disk.
Wait for the message to clear.
Close front door The printer’s front door is open. Close the front door to clear the
message.
Close side door The printers side door is open. Close the side door to clear the
message.
Close door <x> Check finisher
installation
A door on the finisher is open. Close the finisher door to clear the
message.
Close tray <x> top cover The hi-cap feeder door is open. Close the specified top cover to clear
the message.
<Color> Low The specified toner cartridge is
low.
-Select Continue to print without
replacing the toner cartridge.
-Replace the specified toner
cartridge.