Lexmark C920 - Page 73

Diagnostic information 2-31
5056-XXX
Color Photo Dev Life Warning The color photodevelopers are
nearing the end of life.
-Select Continue to continue
printing without replacing the color
photodevelopers.
-Replace the color photodevelopers.
Copies Enter the desired number of copies.
Defragmenting Flash
DO NOT POWER OFF
The printer is defragmenting its
flash memory.
Warning: Do not turn the printer off
while this message is displayed.
Wait for the message to clear.
Delete Delete a print job in the printer’s
queue.
-Select Continue to delete the
specified job.
-Press Stop to cancel the operation.
Delete all Delete all print jobs in the printer’s
queue.
-Select Continue to delete all held
jobs.
-Press Stop to cancel the operation.
Delete all confidential jobs Delete all confidential jobs in the
printer’s queue.
-Select Continue to delete all
confidential jobs.
-Press Stop to cancel the operation.
Deleting The printer is deleting print jobs. Wait for the message to clear.
Disabling DLEs Wait for the message to clear.
Disabling Menus The printer is responding to a
request to disable the menus.
Wait for the message to clear.
Note: While the menus are disabled,
you cannot change the printer
settings from the operator panel.
Disk corrupted The printer has attempted a disk
recovery process, and cannot
repair the disk.
-Select Continue to reformat the
disk and delete all files currently
stored on the disk.
-Select Do not reformat to clear
the message without reformatting
the disk.
Disk Recovery x/5 yyy% The printer is attempting to
recover the hard disk. Disk
recovery takes place in five
phases; the operator panel
displays the percent complete of
the current phase.
Do not turn the printer off while this
message is displayed.
Wait for the message to clear.
Empty box M The hole punch box on the
finisher is full.
Empty the hole punch box, and if
necessary, reset the hole punch
counter.
Select Continue to clear the
message and print without using the
hole punch feature.
Enabling Menus The printer is responding to a
request to make the menus
available to users.
Wait for the message to clear.
Encrypting Disk yyy%
DO NOT POWER OFF
The printer is encrypting the hard
disk. The percent complete is
displayed.
Warning: Do not turn the printer off
while this message is displayed.
Wait for the message to clear.
Engine Warming The printer is warming the fuser
assembly.
Wait for the message to clear.
Message Meaning Action