Lexmark C920 - Page 74

2-32 Service Manual
5056-XXX
Enter PIN Enter the PIN you identified in the
driver when you sent the confidential
job to the printer.
Enter PIN to lock Enter the correct pin number to lock
the operator panel and prevent menu
changes.
Error printing from USB drive The printer is unable to process a
job on a USB drive.
Wait for the message to clear.
Error reading USB drive The printer cannot access the
USB drive.
Wait for the message to clear.
Flushing buffer The printer is flushing corrupted
print data and discarding the
current print job.
Wait for the message to clear.
Formatting Disk yyy%
DO NOT POWER OFF
The printer is formatting the hard
disk. The percent complete is
displayed.
Warning: Do not turn the printer off
while this message is displayed.
Wait for the message to clear.
Formatting Flash
DO NOT POWER OFF
The printer is formatting the flash
memory.
Warning: Do not turn the printer off
while this message is displayed.
Wait for the message to clear.
Fuser Life Warning The fuser is nearing the end of its
life.
-Select Continue to clear the
message and print without installing
a new fuser.
-Install a new fuser.
Hex Trace The printer is in Hex Trace mode.
Hole Punch Box Full Self explanatory. -Empty the hole punch box.
-Select Continue to clear the
message and print without using the
hole punch feature.
Insert Staple Cartridge Staple cartridge is empty. -Install a staple cartridge to clear the
message.
-Select Continue to clear the
message and print without using the
staple feature.
Insert Tray <x> The specified tray is missing or
not fully inserted.
Insert the specified tray into the
printer.
Insert hole punch box The hole punch box is missing or
not fully inserted.
-Install the hole punch box.
-Select Continue to clear the
message and print without using the
hole punch feature.
Install <device> or Cancel Job The printer is requesting a
specified device be installed so it
can print.
-Turn the printer off, install the
specified device, and restart the
printer.
-Cancel the current job.
Internal System Error
Reload Bookmarks
-Reload the Bookmarks.
-Select Continue to clear the
message and continue printing.
Internal System Error, Reload
Security Certificates
-Reload the Security Certificates.
-Select Continue to clear the
message and continue printing.
Message Meaning Action