Lexmark C920 - Processor Failure; ASIC Failure; NAND Failure; RAM Slot 1 Bad

2-20 Service Manual
5056-XXX
956 - Processor Failure
Replace the RIP board.
957 - ASIC Failure
Replace the RIP board.
958 - NAND Failure
Replace the RIP board.
960 - RAM Slot 1 Bad
Replace the RAM card or the RIP board.
961 - RAM Slot 2 Bad
Replace the RAM card or the RIP board.
964 - Emulation Error
Replace the DLE board. If this does not fix the problem, replace the RIP board.
970 - Standard Network Error
Check the network card in slot x on the RIP card.
975 - Unrecognizable Network Port
Software error.
956.00 Service
System Board - RIP
card failure: proces-
sor failure
956.01 Service
System Board - Pro-
cessor overtemp
958 Service
NAND Failure
960 Service
RAM Memory Error
964 Service
Emulation Error
970 Service
Standard Network
970 Service
Network Card x