Lexmark M3250 Service Manual

3 Follow the instructions on the screen.
To erase hard disk memory, do the following:
1 From the control panel, navigate to Settings > Device > Maintenance > Out of Service Erase > Sanitize all
information on hard disk.
2 Select Sanitize all information on hard disk, and then select ERASE.
3 Follow the instructions on the screen.
Note: This process can take from several minutes to more than an hour, making the printer unavailable for
other tasks.
If a hard disk is replaced, then do the following:
1 Remove the hard disk, and then return it to the customer.
2 Request the customer to sign the Customer Retention form.
Note: You can get printed copies of the form from your Lexmark partner manager.
3 Take a photo of the signed form, and then upload it to the Service Request debrief tool.
4 Fax or e-mail the signed form to the number or e-mail address shown at the bottom of the form.
Handling ESD‑sensitive parts
Many electronic products use parts that are known to be sensitive to electrostatic discharge (ESD). To prevent
damage to ESD-sensitive parts, do the following:
• Turn o the printer before removing logic boards.
• Keep the parts in their original packing material until you are ready to install them into the printer.
• Make the least possible movements with your body to prevent an increase of static electricity from clothing
fibers,
carpets, and furniture.
• Put the ESD wrist strap on your wrist. Connect the wrist band to the system ground point. This action
discharges any static electricity in your body to the printer.
• Hold the parts by their edge connector shroud. Do not touch its pins. If you are removing a pluggable module,
then use the correct tool.
• If possible, keep all parts in a grounded metal cabinet.
• Do not place the parts on the printer cover or on a metal table. If you need to put down the parts, then put
them into their packing material.
• Prevent parts from being accidentally touched by other personnel. Cover the printer when you are not
working on it.
• Be careful while working with the parts when cold-weather heating is used. Low humidity increases static
electricity.
4600-830, -835, -895
Parts removal
154

Lexmark M3250 Specifications

General

Color	No
Duplex printing	Yes
Print technology	Laser
Time to first page (black, normal)	6 s
Print speed (black, normal quality, A4/US Letter)	50 ppm
Printing colors	Black
Maximum duty cycle	175000 pages per month
Recommended duty cycle	2000 - 20000 pages per month
Number of print cartridges	1
Page description languages	-
Paper input type	Paper tray
Total input capacity	650 sheets
Total output capacity	250 sheets
Maximum input capacity	2300 sheets
Maximum number of input trays	4
Multi-Purpose tray input capacity	100 sheets
Envelopes sizes	7 3/4, 9, 10, DL
Paper tray media types	Card stock, Envelopes, Labels, Plain paper, Transparencies
Non-ISO print media sizes	Executive (184 x 267mm), Folio (media size), Legal (media size), Letter (media size), Oficio (media size), Statement (140 x 216mm), Universal
ISO A-series sizes (A0...A9)	A4, A5, A6
JIS B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Mobile printing technologies	Apple AirPrint, Google Cloud Print, Mopria Print Service
USB connector	USB Type-A / USB Type-B
Standard interfaces	Ethernet, USB 2.0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Processor cores	2
Processor frequency	1000 MHz
Sound pressure level (printing)	55 dB
Operating altitude	0 - 2896 m
Operating temperature (T-T)	16 - 32 °C
Operating relative humidity (H-H)	8 - 80 %
Sustainability certificates	EPEAT Silver, ENERGY STAR
Power consumption (printing)	- W
Control type	Touch
Product color	Black, White
Display diagonal	4.3 \
Market positioning	Business

Weight and Dimensions

Depth	373.4 mm
Width	398.8 mm
Height	302.3 mm