Vertiv | Liebert® GXT5™ | Installer/User Guide 77
4.3. Editing Display and Operation Settings
You may adjust the display settings and UPS conguration via the LCD. The display and operation settings are
password protected. The default password is 111111 (six ones).
• We recommend that you change the password to protect your system and equipment and record the
new password and store it in an accessible location for later retrieval. See Changing the Password on
the next page.
To enter the password:
1. Press the up-arrow button to change the digit shown, then press the down-arrow button to move to the next
digit.
2. Repeat to select each digit, and press Enter to submit the password.
Figure 4-9 Password Prompt
4.3.1. Settings Prompts
While using the operation and display panel, prompts display to alert you to specic conditions or require
conrmation of commands or settings. Table 4-5 lists the prompts and their meaning.
To Next Page
Loading...
