Vertiv | Liebert® GXT5™ | Installer/User Guide
3
Chapter 1: GXT5 Description
The Liebert® GXT5 is a compact, online uninterruptible power system (UPS) that continuously conditions and
regulates its output voltage. The Liebert® GXT5 supplies microcomputers and other sensitive equipment with
clean sine-wave input power.
Upon generation, AC power is clean and stable. However, during transmission and distribution it is subject to
voltage sags, spikes, and complete failure that may interrupt computer operations, cause data loss, and damage
equipment.
The Liebert® GXT5 protects equipment from these disturbances. The Liebert® GXT5 continuously charges its
batteries from the mains, enabling it to supply power to connected loads, even when the mains fail.
1.1. UPS Features and Available Models
The GXT5 includes the following features. Table 1-1 below, lists the available models and power ratings.
• Enhanced load capacity with an output power factor of 1.
• Optional tower or rack installation to meet varying installation requirements.
• Parallel-connection capability for 10-kVA, 16-kVA, and 20-kVA models achieves up to 2 + 1 parallel
redundant power.
• Adapts to areas with unstable power-mains supply via high-frequency double-conversion topology structure,
with high input-power factor, wide input-voltage range, and output immune to grid interference.
• Programmable terminals on 10-kVA and lower models protect key devices when load is heavy.
• Operation and display panel with model-specic color LCD oers simple conguration and control of the
UPS.
• ECO power-supply mode and smart-sleep mode help you save the maximum amount of energy.
Table 1-1 UPS Models and Power Ratings
MODEL NUMBER NOMINAL POWER RATING @ 230 V INPUT
GXT5-750IRT2UXL*
750 VA/750 W
GXT5-750IRT2UXLE
GXT5-1000IRT2UXL*
1000 VA/1000 W
GXT5-1000IRT2UXLE
GXT5-1500IRT2UXL*
1500 VA/1500 W
GXT5-1500IRT2UXLE
GXT5-2000IRT2UXL*
2000 VA/2000 W
GXT5-2000IRT2UXLE
To Next Page
Loading...
Need help?
General
