Page 293 of 295
Warnings
• Make a proper cable installation to avoid short-circuit of cables. Regular inspection must be made for wear and damage.
Defective parts must be replaced.
• Ensure that mains cable plug is fully inserted into mains socket.
Recommendations
• The charger CHL50 is specifically designed to charge the BAL50 type battery.
• Special care should be taken when mounting the CHL50.
• If the CHL50 is mounted correctly, the CHL50 complies to IPX4.
• If the CHL50 is mounted incorrectly, then water may enter the screw holes resulting in
IPX4 non-compliance and cause malfunction and hazardous situations.
• In cleaning situations, the charger must be disconnected from mains.
To Next Page
Loading...
Need help?
General
