Link4 iPonic 624 - Page 30

iPonic 624® Manual PN 995-1124-00
30| Page
CO2 Fuzzy Settings —this is a
very efficient technique for
control of your CO2 injection
process.
The details of this feature and
the programming instructions
are in Appendix A.
The CO2 On Time cycle is the
run time when CO2 is injected
into the room from a tank, given
that the CO2 level is below its
target and the light threshold is
met.
The CO
2
Off Time helps avoid
saturation and enables the CO
2
to
fill the room gradually. The Off
Time can be set to hours, minutes
and seconds.
You will have this screen, where
you select the “Switch to
Generator” Option. If you are
on this screen and are using a
CO2 Tank then Select Button
#5.