Lucent Technologies Galaxy Power System 4848/100
12 - 14 Troubleshooting Preparations Issue 5 June 2000
Reference Figures, continued
Low Voltage Load
Disconnect
The EBV low voltage load disconnect (LVLD) contactor control board
is mounted on the right side of the cabinet, as shown in Figure 12-10.
The manual contactor control switch (SW300) is not meant to be used
to permanently override the LVLD function. It is only to be used
temporarily while servicing or testing the equipment.
Figure 12-10: Low Voltage Load Disconnect Contactor
Control Switches
To Next Page
Loading...