Lucent Technologies Galaxy 4848/100 User Manual

Lucent Technologies Galaxy Power System 4848/100
Issue 5 June 2000 Troubleshooting Millennium Systems 14 - 9
CTRL MIN Minor
Communication
Fail Alarm
Blinking
ALM LED
on rectifier
Loss of
communication
with controller:
•Defective
interface from
rectifier to
controller
•Internal controller
or rectifier failure
1. Verify that the controller
is powered and operating
correctly.
2. If there are no controller
alarms, replace the
equipment that has lost
communication.
3. If the problem is not
corrected, call your local
RTAC representative.
CTRL MIN Self Fail Test -- See “Controller
Fail”.
See “Controller Fail”.
CTRL MIN Thermal Probe
Failure
-- Battery thermal
probe has failed.
Call your local RTAC
representative.
Table 14-C: Controller Alarms
(See Figures 12-4 and 12-5)
Controller
LED
Controller
Alarm
Status
Millennium
Controller Display
Other
Indication(s)
Possible Problem(s) Possible Solution(s)

Lucent Technologies Galaxy 4848/100 Specifications

General

Brand	Lucent Technologies
Model	Galaxy 4848/100
Category	Power Supply
Language	English