OPTIONS AND ATTACHMENTS
Consult your Windrower dealer
for
details on the
following:
NOTE:
If
not
factory ordered, installation
of
these
options and attachments is
to
be
done
by
Wind-
rower dealer.
Self-Cleaning Air Intake Screen
This automatic screen cleaning device "vacuums•
the screen
by
means
of
two
rotors.
Forked Tail-Wheel Casters
Optional
to
formed casters, the forked tail-wheel
casters are available
for
9.SL - 14 tires
or
for
16.SL -
16
.1 tires.
Engine Tachometer
SELF-CLEANING
AIR
INTAKE SCREEN
FORKED
CASTER
OPTION
Mounted
at
the bottom
of
the machine monitor panel
to
the right
of
the operator, the tachometer indicates
engine speed in revolutions per minute
(RPM).
Header Hydraulics Field
Conversion Packages
REEL LIFT /CONVEYOR SPEED
CONVERSION
PACKAGE
This package converts a tractor which was factory configured specifically
for
use with
an
Auger Header
for
use with a header with hydraulically controlled reel height and conveyor speed (Multi-Crop
or
Harvest
Headers).
HEADER
ATTITUDE
CONTROL
CONVERSION
PACKAGE
This package adds the header attitude
,cut
height•) control
to
the existing hydraulic package. This allows
the operator
to
vary cut height from one side
of
the header
to
the other. Uses
of
this control include:
• ·Return
to
cut
height•. Allows setting the cut height independent
of
header height control.
• Allows varying cut height without changing cutterbar angle.
• Levelling the header. (Useful with Triple Delivery Harvest Headers where differences in
deck
weight can
cause one side
of
the header
to
be lower.
• Saw-tooth stubble, commonly used as a snow trap.
• Finishing off a narrow strip of field without disturbing other windrows.
127
To Next Page
Loading...
