MacDon 9000 - Service Procedures

MAINTENANCE/SERVICE
Service Procedures
A
CAUTION: To avoid personal injury,
before servicing machine
or opening
drive covers:
1. Fully lower header and reel.
2. Disengage header drive dutch .
3. Stop engine and remove key.
4. Engage park brake.
5. Wait for all moving parts to stop.
Wear dose-fitting dothing and cover long hair .
Never wear dangling items such as scarves or
bracelets.
Wear protective shoes with slip-resistant soles, a
hard hat, protective glasses or goggles and heavy
gloves.
Be prepared if an accident should occur. Know
where the first aid kit and fire extinguisher are
located and how to use them.
Keep
the service area dean and dry. Wet. or oily
floors are slippery. Wet. spots can be dangerous
when working with electrical equipment. Be sure
all electrical outlets and tools are property
grounded .
Use adequate
light for the job at hand.
Park on level surface when possible. Block wheels
securely.
Replace
all shields removed or opened for service.
Do not substitute parts. especially safety related,
that may not meet strength or design requirements
of the manufacturer.
Keep the windrower dean . Do not allow oil or
grease to accumulate on the service platform,
ladder or controls.
Never use gasoline, naphtha or any volatie
material for deaning purposes. These materials
may be toxic and/or flammable.
44
STAY CLEAR OF DRIVEUNE
AND ALL MOVING PARTS