MAINTENANCE/SERVICE
Fuels, Fluids
and
Lubricants (continued)
HYDRAULIC
OIL
Use
SAE
1 0W30 Class SF
or
CC engine oil.
ENGINE
OIL
Depending upon the expected air temperature
range during the oil change interval, use the oil
viscosity shown in the temperature chart
at
right.
1 0W30 and
15W4-0
multi-grade oils are recom-
ended because
of
the wide temperature ranges in
which they are effective. Do not mix oil types
or
viscosities.
For the gasoline engine, oil should comply with
SAE specs for Class SF
or
CC engine oil.
For the naturally-aspirated diesel engine, oil should
comply with SAE specs for Class
CC
engine oil.
For the turbocharged diesel engine, oil should
comply with
SAE
specs for Class SF
or
CD engine
oil.
BEVEL
GEAR
BOX
LUBRICANT
Use
SAE
SOW-90
thermally stable GL-5 gear
lubricant recommended for hypoid gears.
POWER
WHEEL
GEAR
LUBRICANT
Use SAE
85W-14-0
gear lubricant.
(API
Service
aassification GL-5)
STORING
LUBRICANTS
IMPORTANT
: Your machine can operate at
top
efficiency only if clean lubricants are used. Use
clean containers
to
handle all lubricants. Store
them in an area protected from dust, moisture and
other contaminants.
Tem
pe
rature
Fahr
enhe
it
MUL
Tl-GRADE
OIL
·34° ·
29
° ·
23
° -18° · 12°
-7
° -1° 4° 10° 16° 21°
27
° 32°
38
°
Temperatur
e
Celsius
AIR TEMPERATURE RANGES
46
To Next Page
Loading...
