MacDon DWA - 3.8 Positioning Conditioner Rolls

215626 67 Revision A
3.8 Positioning Conditioner Rolls
The conditioner roll gap must be adjusted to throw crop onto the Double Windrow Attachment (DWA).
The gap between the conditioner rolls must be small enough to throw the crop onto the DWA.
The gap size depends on the crop type and volume:
• A gap that is too small for a heavy crop will require excessive engine power and will cause excessive wear to the DWA.
• A gap that is too large will not throw the crop with enough velocity to reach the side delivery deck.
Refer to the conditioner roll adjustment procedure in your header operator’s manual.
OPERATION