11
PRESS S
Use arrow joystick to move
the
highlight
up and down.
Press ENTER to accept
Fran~ais
Deutsch
Nederlands
Suomi
Espcuiol
Italiano
Portugues
~
Turn
the eXplorist on.
Press
the
Power
button.
When
the Startup
screen
is
displayed,
press
ENTER.
Select Language.
When
you
turn
on
the eXplorist for the first time,
you
are
given the option of selecting
one
of the ten languages that
can
be
used.
You
can
change the language selection at
any
time
by
accessing
Menu>
Preferences>
Languages.
Tip:
If
you
accidentally change the language but
you
can't
read
the text
and
need
to change it
back,
press
the
NAV
button until
the
Satellite Status
screen
is
displayed.
Press
MENU.
Use
the
Arrow joystick to highlight the fourth line
and
press
ENTER.
Use
the Arrow joystick to highlight the fifth line
and
press
ENTER.
The
Language Select
screen
will
be
displayed.
Read Warning.
When
you
agree
to the warning statement,
press
ENTER
to continue.
All
data
is
provided
for
reference
only.
You
assume full
responsibility
and
risk
when using
this
device.
PRESS
18
TO AGREE
Press ENTER to continue
Compute
Initial
Position.
For
this operation, it
is
best if
you
are
outside
and
have
a clear,
unobstructed view of the
sky.
Without a clear
view,
this will take much longer
and
could
result
in
the eXplorist being unable to compute the initial position
automatically.
The
eXplorist begins to compute your initial position. This
may
take a
few
minutes while it
is
doing a cold start.
Normally,
when
you
first turn the eXplorist
on
it will compute your
position
in
a matter of seconds
when
able to
do
a warm start.
(An
explanation of cold start
vs.
warm start
is
provided following this
section
.)
The
Satellite Status
screen
is
displayed, showing
you
the
progress
of the collection of satellite data. Satellite Status screen shows
how many satellites are being
tracked,
as
well
as
the
relative strength
of
the signal.
To Next Page
Loading...
Need help?
General
