45
Creating a
GOlO
Route
The
instructions
here
describe the most common
and
easiest
way
to create a
GOTO
route.
With the
POI
highlighted,
press
ENTER.
If
you
already
have
a
Gala
you
will
be
asked
to
confirm the creation of this
GOTO.
Note: Detailed instructions for searching the
POI
I~~
database can
be
found in the Points of Interest section 1
of this manual. i
~Ot
;,,):\:::::::::,'!imE'
Press
GOTO.
Use
the
POI
database to select the
POI
to
be
the
desti nation.
1.
2.
3.
4.
Map
screen
with a
GOTO
route active. Notice the
After
you
press
ENTER,
the last
viewed
navigation
screen
will
be
line
on
the
screen
that
displayed, updated
as
needed
to
provide information about the graphically displays the
GOTO
route
you
have
created.
On
the
Map
screen, a line will
be
route.
drawn
representi
ng
the
GOTO
route.
The
Compass
screen
wi
II
change to display the
name
of the
POI
used
as
the destination
in
the
screen
header
bar
and
an
icon representing the destination outside the diameter of the compass.
As
you
are
moving
you
will notice a
second
line appearing that points to your
destination if
you
go
off the planned course.
The
double solid line
is
the original,
computed route.
The
new,
dashed
line
is
an
updated route, pointing towards your
destination.
So
even
if
you
can't follow the computed route,
you
will
be
updated with
a
new
course to follow. This updating of
your
route will
also
occur during multi-leg
routes
so
you
always
know
which
way
you
need
to
go.
To Next Page
Loading...
Need help?
General
