Magellan eXplorist - Converting the Track Log to a Route

Converting the Track Log to a Route
64
This function takes the track log and turns it into a multi-leg route that is saved in your route
Iist. From here,
the route can be ed ited if necessary.
Note: Convert to Route is available for both active track logs and track logs you have saved.
1. Press MENU.
2. Use the Arrow joystick to highlight Track Log.
3. Press ENTER.
4. Use the Arrow joystick to highlight Active Track or any track log you have
previously saved.
5. Press
ENTER.
6. Highlight Convert to Route.
7. Press ENTER.
8. Use the Arrow joystick and ENTER button to assign a name
for
the route. Route names can be up to ten characters in
length.
9. Use
the Arrow joystick to highlight OK when the name has
been entered.
10. Press ENTER.
11. Use the Arrow joystick to select the fi Ie where you want the route saved.
12. Press ENTER.