48
Multi-leg routes can
be
used to navigate to a final destination using
multiple
legs.
An
example would
be
leaving the dock, motoring over to buoy 1, then the bait boat, and finally
to a fishing hot spot. This route would
go
from Dock to Buoy 1,Buoy 1 to Bait, Bait to Fish.
Features of a
multi-leg
route:
• Multi-leg routes can
be
saved in internal memory or to
an
SD
card.
• Multi-leg routes remain active even after the eXplorist has been turned off.
• Multi-leg routes can
be
edited, reversed, deleted, or viewed
on
the map.
• When a multi-leg route is active, you can switch which leg will
be
used
as
the next
destination point.
In
the above example, you could skip going to Buoy 1
by
selecting
the Bait leg when the route is active.
To Next Page
Loading...
