40
pals
that
you
have saved can
be
viewed
on
the Map screen to assist
you
in locating the
POI.
1. Press
MENU.
2.
Use
the Arrow joystick to highlight Pts
of
Interest.
3.
Press
ENTER.
4.
Use
the Arrow joystick up/down to highlight My Pts
of
Interest.
5.
Use
the Arrow joystick left/right to select
Nearest
or Alphabetical.
6. Press
ENTER.
7. Locate the fi
Ie
where the
PO
I
has
been saved and press
ENTER.
(The eXplorist wi
II
automatically open
the
default file.)
8. Highlight the
POI
and press
ENTER.
9. Use the Arrow joystick to highlight
View
on
Map.
10.
Press
ENTER.
11.
The Map screen will
be
displayed in the Cursor mode. The cursor will
be
directly
over the
POI
you have selected.
You
may use the Zoom buttons to change the scale
of the map displayed; and
if
your position icon is
within
range,
it
will
be
shown.
12.
Press
ESC
to return to the Iist of
PO
Is
found
instep
7.
Note: Remember
that
pressing the
NAV
button will return you to the last viewed Map
screen.
In
step
12
if
you are finished with the
pals
in the
POI
database,
you
could
press
NAV
to close the
POI
database and return to the last viewed Map screen.
To Next Page
Loading...
Need help?
General
