Magellan eXplorist User Manual

59
Stopping and Resuming Active Track Logging
This provides the ability to turn off the recording of the active track and then to starting it up
again.
Press ENTER.
Note: Stop Logging is displayed only when the active track
is being recorded; Resume Logging appears only when the
active track
is not bei ng recorded.
1.
2.
3.
4.
5.
6.
7.
Press MENU.
Use the Arrow joystick to highlight Track Log.
Press ENTER.
Highlight Active Track.
Press ENTER.
Highlight Stop Logging or Resume Logging.
Track Log List with
information at the bottom
for the number of legs and
the distance of the track
Note: The eXplorist will fill in a straight line from the point log highlighted
where track logging was stopped to the point where it has
been resumed. This is true unless more than four hours
have elapsed between the stop and the Resume Logging command. In that case,
the eXplorist will not draw a straight line from the stop to the resume points of the
track.

Magellan eXplorist Specifications

General

Resolution	240 x 320 pixels
Battery Life	18 hours
Waterproof	IPX7
Update Rate	1 second
Waypoints	500
Routes	20
SBAS	WAAS/EGNOS
Memory Expandable	No
Screen Size	2.2 inches
Battery Type	2 AA batteries
Dimensions	1.3 inches
Accuracy	3 meters
Dimensions (inches)	1.3"
Maps	Basemap
Weight (oz)	5.3 oz (with batteries)